国产bbaaaaa片,成年美女黄网站色视频免费,成年黄大片,а天堂中文最新一区二区三区,成人精品视频一区二区三区尤物

首頁> 外文學位 >Fabrication of Polylactide Nanocomposite Filament Using Melt Extrusion and Filament Characterization for 3D Printing
【24h】

Fabrication of Polylactide Nanocomposite Filament Using Melt Extrusion and Filament Characterization for 3D Printing

機譯：使用熔體擠出和3D打印的纖維特性表征制備聚乳酸納米復合纖維

獲取原文
獲取原文并翻譯 | 示例
  • 摘要
  • 著錄項
  • 相似文獻
  • 相關主題

摘要

Fused deposition modeling (FDM) technology uses thermoplastic filament for layer by layer fabrication of objects. To make functional objects with desired properties, composite filaments are required in the FDM. In this thesis, less expensive mesoporous Nano carbon (NC) and carbon nanotube (CNT) infused in Polylactide (PLA) thermoplastic filaments were fabricated to improve the electrical properties and maintain sufficient strength for 3D printing. Solution blending was used for nanocomposite fabrication and melt extrusion was employed to make cylindrical filaments. Mechanical and electrical properties of 1 to 20 wt% of NC and 1 to 3 wt% of CNT filaments were investigated and significant improvement of conductivity (3.76 S/m) and sufficient yield strength (35MPa) were obtained. Scanning electron microscopy (SEM) images exhibited uniform dispersion of nanoparticles in polymer matrix and differential scanning calorimetry (DSC) results showed no significant changes in the glass transition temperature (Tg) for all the compositions. Perspective uses of this filament are for fabrication of electrical wires in 3D printed robots, drones, prosthetics, orthotics and others.
機譯：熔融沉積建模（FDM）技術使用熱塑性長絲逐層制造對象。為了使功能對象具有所需的特性，F(xiàn)DM中需要復合長絲。在本文中，制造了注入到聚乳酸（PLA）熱塑性細絲中的較便宜的介孔納米碳（NC）和碳納米管（CNT），以改善電性能并保持3D打印的足夠強度。溶液共混用于納米復合材料的制造，熔體擠出用于制造圓柱形長絲。研究了1至20 wt％的NC和1至3 wt％的CNT細絲的機械和電氣性能，并顯著提高了電導率（3.76 S / m）和足夠的屈服強度（35MPa）。掃描電子顯微鏡（SEM）圖像顯示了納米顆粒在聚合物基質中的均勻分散，差示掃描量熱法（DSC）結果表明，所有組合物的玻璃化轉變溫度（Tg）均無明顯變化。這種燈絲的透視用途是用于3D打印機器人，無人機，假肢，矯形器等中的電線制造。

著錄項

  • 作者

    Jain, Shrenik Kumar.;

  • 作者單位

    The University of Texas at Dallas.;

  • 授予單位 The University of Texas at Dallas.;
  • 學科 Mechanical engineering.;Materials science.
  • 學位 M.S.
  • 年度 2017
  • 頁碼 70 p.
  • 總頁數 70
  • 原文格式 PDF
  • 正文語種 eng
  • 中圖分類 康復醫學;
  • 關鍵詞

相似文獻

  • 外文文獻
  • 中文文獻
  • 專利
獲取原文

客服郵箱：kefu@zhangqiaokeyan.com

京公網安備：11010802029741號 ICP備案號：京ICP備15016152號-6 六維聯合信息科技 (北京) 有限公司?版權所有

  • 客服微信

  • 服務號