国产bbaaaaa片,成年美女黄网站色视频免费,成年黄大片,а天堂中文最新一区二区三区,成人精品视频一区二区三区尤物

首頁> 美國衛生研究院文獻>Materials >Experimental Assessment of Thermal Performance and Bridging Effects of Low-Cost Sandwich Panels under a High-Temperature Impinging Jet
【2h】

Experimental Assessment of Thermal Performance and Bridging Effects of Low-Cost Sandwich Panels under a High-Temperature Impinging Jet

機譯：高溫撞擊噴射下低成本夾心板的熱性能和橋接效果的實驗評價

代理獲取
本網站僅為用戶提供外文OA文獻查詢和代理獲取服務，本網站沒有原文。下單后我們將采用程序或人工為您竭誠獲取高質量的原文，但由于OA文獻來源多樣且變更頻繁，仍可能出現獲取不到、文獻不完整或與標題不符等情況，如果獲取不到我們將提供退款服務。請知悉。
  • 摘要
  • 著錄項
  • 相似文獻
  • 相關主題

摘要

Sandwich panels are commonly used across industries for their ability to bear structural and thermal loads. In this paper, a panel chamber matching apparatus was designed to investigate the thermal performance of eight steel-based panels by exposing them to an impinging jet at approximately 550 °C for 30 min. Three types of low-cost materials (polycrystalline filaments, silica aerogel, and aluminum silicate) were used as the insulation core. The temperature of the panel surfaces was measured, as well as the metallic fasteners, including bolts, nails, battens, seams, and angle iron, to examine their thermal bridge effects. Major conclusions include the following: first, the maximum temperature on the impinged surface was consistent among all 20 cases, whereas that of the surface under free convection varied, ranging from 41 to 120 °C, depending on the core and thermal bridges. Second, most of the highest temperatures on opposite surfaces were caused by a section of bare angle iron, and this bridging effect could be significantly reduced by up to 50 °C using a few layers of cloth, although the improvement could be temporary. Bolts and nails were less effective as thermal bridges, while the battens could be more effective. Third, the estimated heat flux of all specimens ranged from 167 to 331 W·m?2.
機譯：三明治面板通常用于跨行業，以實現結構和熱負荷的能力。在本文中，設計了一種面板室匹配裝置，用于通過將其暴露于大約550℃的撞擊射流30分鐘來研究八鋼基面板的熱性能。使用三種類型的低成本材料（多晶絲，二氧化硅氣凝膠和鋁硅酸鋁）作為絕緣核心。測量面板表面的溫度，以及金屬緊固件，包括螺栓，釘子，板條，接縫和角鐵，以檢查它們的熱橋效果。主要結論包括以下內容：首先，撞擊表面上的最高溫度在所有20例中都是一致的，而自由流對流的表面的變化范圍為41至120°C，取決于芯和熱橋。其次，相對表面上的大多數最高溫度是由一段裸角鐵引起的，并且這種橋接效果可以使用幾層布明顯減少50°C，盡管改善可能是暫時的。螺栓和指甲的螺栓和釘子效果效果較低，而巴格可能更有效。第三，所有試樣的估計熱通量范圍為167至331W·m-2。

著錄項

相似文獻

  • 外文文獻
  • 專利
代理獲取

客服郵箱：kefu@zhangqiaokeyan.com

京公網安備：11010802029741號 ICP備案號：京ICP備15016152號-6 六維聯合信息科技 (北京) 有限公司?版權所有

  • 客服微信

  • 服務號