国产bbaaaaa片,成年美女黄网站色视频免费,成年黄大片,а天堂中文最新一区二区三区,成人精品视频一区二区三区尤物

首頁> 外文期刊>Journal of Materials Science >Failure mechanisms of thermal barrier coatings on MCrAlY-type bondcoats associated with the formation of the thermally grown oxide
【24h】

Failure mechanisms of thermal barrier coatings on MCrAlY-type bondcoats associated with the formation of the thermally grown oxide

機譯：MCrAlY型粘結涂層上熱障涂層的失效機理與熱生長氧化物的形成有關

獲取原文
獲取原文并翻譯 | 示例
  • 摘要
  • 著錄項
  • 相似文獻
  • 相關主題

摘要

The effect of the thermally grown oxide (TGO) formation on the lifetime of the thermal barrier coatings (TBC) with MCrAlY-bondcoats (BC) is reviewed. A number of factors affecting the TGO-formation and TBC-failure are discussed including the coating microstructure, geometrical (coating roughness and thickness) and processing parameters. Under given testing conditions for a specific EB-PVD-TBC-system forming a flat, uniform alumina TGO a critical TGO-thickness for TBC-failure can be defined. This TGO-morphology is, however, not necessarily optimum for obtaining long TBC-lifetime, which can be extended by formation of TGO’s with an uneven TGO/BC interface. In contrast, APS-TBC-systems are prone to formation of intrinsically inhomogeneous TGO-morphologies. This is attributed to non-uniform depletion of Y and Al underneath rough MCrAlY-surfaces as well as due to the commonly observed repeated-cracking/re-growth of the TGO during temperature cycling. The latter phenomenon depends on the exposure temperature and the mechanical properties of the APS-TBC. In both types of TBC-systems the TGO-formation and TBC-lifetime appear to be very sensitive to the manufacturing parameters, such as vacuum quality during bondcoat spraying and temperature regime of the bondcoat vacuum heat-treatment.
機譯：綜述了熱生長氧化物（TGO）的形成對帶有MCrAlY粘結涂層（BC）的隔熱涂層（TBC）壽命的影響。討論了影響TGO形成和TBC失效的許多因素，包括涂層的微觀結構，幾何形狀（涂層的粗糙度和厚度）以及加工參數。在給定的測試條件下，對于形成平坦，均勻的氧化鋁TGO的特定EB-PVD-TBC系統，可以定義TBC失效的臨界TGO厚度。然而，這種TGO形態對于獲得較長的TBC壽命不一定是最佳的，這可以通過形成具有不均勻的TGO / BC界面的TGO來延長。相反，APS-TBC系統易于形成內在不均一的TGO形態。這歸因于在粗糙的MCrAlY表面下Y和Al的不均勻消耗，以及歸因于在溫度循環過程中TGO的反復裂紋/重新生長。后一種現象取決于APS-TBC的暴露溫度和機械性能。在兩種類型的TBC系統中，TGO的形成和TBC的壽命似乎對制造參數非常敏感，例如粘結涂層噴涂過程中的真空質量以及粘結涂層真空熱處理的溫度范圍。

著錄項

相似文獻

  • 外文文獻
  • 中文文獻
  • 專利
獲取原文

客服郵箱：kefu@zhangqiaokeyan.com

京公網安備：11010802029741號 ICP備案號：京ICP備15016152號-6 六維聯合信息科技 (北京) 有限公司?版權所有

  • 客服微信

  • 服務號